Fabrication and laser performances of Yb:Sc2O3 transparent ceramics from different combination of vacuum sintering and hot isostatic pressing conditions

Year: 2020

Authors: Toci G., Hostasa J., Patrizi B., Biasini V., Pirri A., Piancastelli A., Vannini M.

Autors Affiliation: CNR, Consiglio Nazl Ric, INO, Via Madonna Piano 10 C, I-50019 Sesto Fiorentino, FI, Italy; CNR, ISTEC, Natl Res Council, Inst Sci & Technol Ceram, Via Granarolo 64, I-48018 Faenza, RA, Italy; CNR, Ist Fis Applicata Carrara, IFAC, Consiglio Nazl Ric, Via Madonna Piano 10C, I-50019 Sesto Fiorentino, FI, Italy.

Abstract: In this paper we report on the preparation and laser performance of transparent 3aL% Yb:Sc2O3 ceramics by reactive sintering of commercially available powders under vacuum followed by hot isostatic pressing (HIP). Combinations of different vacuum sintering temperatures (1650 degrees C and 1750 degrees C) and different HIP treatments (1700 degrees C and 1800 degrees C at 200 MPa) were tested in order to understand how these steps influence the microstructure and thus the optical and lasing properties of the ceramic samples. All the samples showed a good optical quality. The microstructure analysis and the laser tests showed that the vacuum pre-sintering temperature is the key factor determining the quality of the samples and the laser performances. The best values of slope efficiency i.e. eta(L) = 50 % and output power i.e. P-out = 6.62 W were obtained for the sample pre-sintered under vacuum at 1650 degrees C and hot isostatically pressed at 1800 degrees C.

Journal/Review: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Volume: 40 (3)      Pages from: 881  to: 886

More Information: The authors gratefully acknowledge the support from the Italian Ministry of Defence under PNRM, Contract No. 8723 of 19/12/2014 (CeMiLAP).
KeyWords: Hot isostatic pressing; Laser ceramics; Yb-doped sesquioxides laser ceramics
DOI: 10.1016/j.jeurceramsoc.2019.10.059

ImpactFactor: 5.302
Citations: 14
data from “WEB OF SCIENCE” (of Thomson Reuters) are update at: 2024-11-10
References taken from IsiWeb of Knowledge: (subscribers only)

Connecting to view paper tab on IsiWeb: Click here
Connecting to view citations from IsiWeb: Click here